AT518 Handheld DC milliohm Meter
ACTIVE
USB-HID
SCPI
DATA LOGGERUSB-DISK
OVERVIEW
    AT518 handheld DC milliohm meter is the use of high-performance processors and 3.5" TFT LCD screen smart handheld Meter. Accurate and convenient measurements of passive-components can be achieved in all occasions for a long time. Wide Measurement Range from 10μΩ to 20MΩ, and 20000 readers. It can guarantee 0.05% accuracy, even in the condition of the testing speed under 15t/s. its unique current testing mode can adapt different testing. To apply to long distance control, DAQ and analysis, AT518 is equipped with Mini-USB interface. AT518 can test all kinds of high-ohm, medium-ohm, low-ohm tester; switch connect, connector contact, relay coil and contact resistance; Transformer, Inductor, motor, deflection coil winding resistance, wire resistance; The metal winding resistance of vehicle, vessels, and airplane; PCD line and hole, etc.
FEATURES
  • Gorgeous dual-colure cast shell
  • Battery and external power supply
  • Automatic power off Function
  • ABS/ PER/SEQ comparison criteria
  • Comparator Function: GD/NG Show
  • 3.5 inches, Truecolor 16M, TFT-LCD Display
  • Auto Zero-Adjust for each range
  • Four-terminal resistance measurement.
  • Mini-USB interface
  • SCPI compatible command sets
  • Keypad lock function
  • Switch both in English and Chinese.
  • Background-lightness adjustment function
  • Automatic shutdown set
  • Size: 210.76mm (Length)*130.23mm (Width)*37.88mm (Heigth)
  • Weight: 500g
  • Battery: 8.4V, Li, 2200mAh, chargeable
  • Max power: ≤5W
  • Battery capacity: Over 8 hours’ continuous use
SPECIFICATIONS
ParameterDCR
Accuracy0.05%
Measurement Range10μΩ~20MΩ
Measurement currentI-max:<1A
RangeAutomatic, Manual, Nominal, 7 range
Speed30 times/s, 15 times/s, 3 times/s
DisplayABS /PER/ SEQ
Display Max20000
Adjustmentshort-circuit reset for all range
Comparatorbuild -in sorting recorder, GD/NG sorting result display
Triggerinternal, manual, remote
InterfaceBuild-in Mini-USB
Temperature compensationAccuracy: 0.2°C Test range: 0~80°C
Method4 terminal shielding (2 check terminal & 2 driving terminal), external shielding ground section
Power SupplyInput:100-240V~50/60Hz 0.35A output: DC9V 1A。 8.4V,2200mAh Li battery
Dimension & Weight130.23 x210.76 x37.88 weight:650g
AccessoriesATL501B 4 terminal kelvin test, ATL909 DC adaptor, ATL202 bag, ATL804 Li battery
Optional AccessoriesATL105Mini-USB communication cable, ATS518 data acquisition software
Other Functions3.5-inch true color 16M color TFT-LCD large font display; keyboard lock, data retention function; compatible with SCPI command set; Chinese and English switching; backlight adjustment; automatic shutdown
APPLICATIONS
    Measure various high, medium and low value resistors
    Various switch contact resistance
    Enameled wire resistance
    Connector contact resistance
    Relay wire package and contact resistance
    Transformer, inductor, motor, deflection coil winding resistance
    Solder point contact resistance
    Wire resistance
    Metal riveting resistance for cars, boats and airplanes
    Printed plate line and hole resistance
    Characterize the low resistance characteristics of electromechanical components
    Metal flaw detection, etc.
DOCUMENTATION
DOCUMENTS
DATASHEET ENGLISH

|

CHINESE
USER'S GUIDE ENGLISH

|

CHINESE
ACCESSORIES
STANDARDS

ATL105

ATL105

MiniUSB通讯电缆

ATL501B

ATL501B

四端开尔文夹

ATL804

ATL804

锂电池

ATL909

ATL909

直流电源适配器

ATL909

ATL909

直流电源适配器

OPTIONS

ATL620

ATL620

SOFTWARE
NONE
Privacy | Term of Use | Help
©2005-2021 Changzhou Applent Instruments Ltd. 苏ICP备13026254号