AT525 Handhold Battery Tester
ACTIVE
R:0.001mΩ~3.3Ω
V: ±60V
USB-232
SCPI
DATA LOGGERUSB-DISK
OVERVIEW
    The AT525 battery internal resistance tester is a an instrument that can measure the internal resistance and voltage of the battery online, which is controlled by a high-performance 32-bit ARM microprocessor.

    A miniature handheld instrument for automatic real-time detection, built-in large-capacity lithium battery for ultra-long standby AT525 has both the portable and desktop performance of a handheld meter, and the instrument can test 0.001mΩ~3.3 Ω resistance, 0~60V DC voltage, data display is stable, resistance 3300 display digits, voltage 6000 display digits.

    The resistance measurement of the instrument adopts the vector test principle, and the voltage measurement adopts the differential test principle, so the open circuit voltage can be accurately measured.

    The instrument has professional sorting function, built-in data record, OK/NG sorting result display sorting sound setting, which is applied to UPS online battery measurement sorting system.

    AT525 is equipped with 1000 sets of data storage, which can save measurement data with one key, which saves your time of recording data, and can be exported to U disk.

    Equipped with a USB interface for remote control and data acquisition and analysis, it is very suitable for pipeline inspection of various types of batteries.
FEATURES
  • Fresh and dazzling two-color casting shell
  • Battery and external power supply mode
  • UPS online detection
  • Four-terminal test
  • Switch between Chinese and English
  • 500 sets of measurement data saved
  • Backlight adjustment
  • Auto power off setting
  • Power consumption≤5W
  • Super long continuous working time ≥ 8h
SPECIFICATIONS
ParametersACR DCV
AccuracyR：0.5%±5dgt（resolution 0.001mΩ）V：0.05%±5dgt（resolution 0.1mV）
RangeR：0.001mΩ~3.3000Ω V：0.0001V～60.000V
Signal SourceAC：1kHz open-circuit voltage：<30mV Test current：<15mA
RangeAutomatic, Manual, Norminal, 4 ranges
Speed1 times/s
Result DisplayABS /PER/ SEQ
Display MaxR：3300 V：6000
AdjustmentShort circuit correction for each range
ComparatorVoltage & Resistance compare separately, voltage & resistance combination compare GD/NG sortingg results display , beep
TriggerInternal, Manual, Remote
Cantact CheckingBroken Wire Detection and Open Detection
InterfaceBuild-in Mini-USB (virtual serial port), charging, U disc
Options18650 Fixture
PowerInput：100-240V~50/60Hz 0.35A output：9V 1A DC ##8.4V 2200mAh li battery
Dimensions130.23 x210.76 x37.88 mm
Mass650g
AccessoriesATL501B 4 terminal kelvin test clip; ATL909 DC adaptor; ATL202 bag; ATL804 Li battery ATL105Mini-USB communication cable﹡ATS528 data collection sofware
Other functions3.5 inch true color LCD, keypad lock, data hold function; compatible SCPI order set; Chines, English adjustable, auto power -off; 500 sets measured data saved with one key
APPLICATIONS
    Measure all kinds of low -voltage battery,storage battery, lithium battery,mobile battery, contact resistance, battery internal resistance, battery voltage
    Fuel Battery measurement
    UPS online measurement
DOCUMENTATION
DOCUMENTS
DATASHEET ENGLISH

|

CHINESE
USER'S GUIDE ENGLISH

|

CHINESE
ACCESSORIES
STANDARDS

ATL105

ATL105

MiniUSB通讯电缆

ATL501B

ATL501B

四端开尔文夹

ATL506B

ATL506B

ATL804

ATL804

锂电池

ATL909

ATL909

直流电源适配器

ATL909

ATL909

直流电源适配器

OPTIONS
NONE
SOFTWARE
Applent Communication Assist
Rev.4.23

CHINESE

Application

FREEWARE

2.4MB

RAR
RELATED PRODUCTS

Compare

AT520L

  • Parameters: AC Resistance , DC voltage
  • Accuracy: R: 0.3%, V: 0.05%
  • Range: R: 1μΩ- 3.2kΩ, V:100μV-60V DC
  • Signal Source: AC 1kHz, open-circuit voltage smaller than 20mV, measurement current smaller than 10mA
  • Range: Automatic and manual with 6 ranges

Compare

AT526

  • Parameters: ACR, DCV
  • Accuracy: R：0.5% V：0.01%
  • Range: R：0.001mΩ~33.000kΩ V：0.00001V~120.000VDC
  • Signal Source: AC 1kHz，Test current：<150mA
  • Range: Automatic & Manual, 7 ranges

Compare

AT526B

  • Parameters: ACR, DCV
  • Accuracy: R：0.5% V：0.01%
  • Range: R：0.001mΩ ～ 33.00Ω V：0.0001V~60.000VDC
  • Signal Source: AC 1kHz，open circuit voltage <20mV，Test current：<150mA
  • Range: Automatic & Manual , 5 ranges

Compare

AT526C

  • Parameters: AC Resistance, DC voltage
  • Accuracy: Resistance:0.5% ; Voltage:0.01%
  • Range: Resistance：0.001mΩ~33.000kΩ Voltage：0.00001V~120.000VDC
  • Signal Source: AC 1kHz，Test current：<150mA
  • Range: 7 ranges, auto & manual

Compare

AT527

  • Parameters: ACR, DCV
  • Accuracy: Accuracy of Resistance 0.5%, voltage 0.01%
  • Range: Test range 0.0001mΩ~3.3000kΩ & 0.00001V~400.000VDC
  • Signal Source: 1kHz, frequency stability: 20ppm
  • Range: 7 ranges,3mΩ~3kΩ. auto , manual,, nominal.

Compare

AT527A

  • Parameters: ACR, DCV
  • Accuracy: Resistance accuracy: 0.5%，Voltage accuracy: 0.01%
  • Range: Test range：0.0001mΩ~3kΩ & 0.00001~200.000V
  • Signal Source: 1kHz, stable frequency: 20ppm
  • Range: 3mΩ~3kΩ with 7 range test.Auto, manual, Nominal.

Compare

AT527B

  • Parameters: ACR, DCV
  • Accuracy: Accuracy of resistance 0.5%，voltage accuracy 0.01%
  • Range: Test range 0.0001mΩ~3kΩ & 0.00001~800.000V
  • Signal Source: 1kHz, Frequency stability: 20ppm
  • Range: 3mΩ~3kΩ with 7 ranges. Automatic,Manual and Nominal

Compare

AT527H

  • Parameters: ACR, DCV
  • Accuracy: Accuracy of resistance: 0.5%，voltage: 0.01%
  • Range: Test range: 0.0001mΩ~3kΩ & 0.00001~1000.00V
  • Signal Source: 1kHz, frequency stability: 20ppm
  • Range: 3mΩ~3kΩ with 7 ranges. automatic, manual and nominal.

Compare

AT527L

  • Parameters: ACR, DCV
  • Accuracy: Accuracy of resistance: 0.5%，voltage: 0.01%
  • Range: Test range: 0.0001mΩ~3.3kΩ & 0.00001~60.00V
  • Signal Source: 1kHz, frequency stability: 20ppm
  • Range: 3mΩ~30Ω with 7 ranges. automatic, manual and nominal.

Compare

AT528

  • Parameters: ACR, DCV
  • Accuracy: R: 0.5%±5dgt（resolution:0.01mΩ） V：0.1%±5dgt（resolution:1mV)
  • Range: R: 0.01mΩ~2.000kΩ V：1mV～50V
  • Signal Source: AC:1kHz open circuit voltage：<30mV Test current：<15mA
  • Range: 6 ranges, automatic, manual, nominal

Compare

AT528L

  • Parameters: ACR, DCV
  • Accuracy: R: 0.5%±5dgt（resolution:0.01mΩ） V：0.1%±5dgt（resolution:1mV)
  • Range: R: 0.01mΩ~2.000kΩ V：1mV～50V
  • Signal Source: AC:1kHz open circuit voltage：<30mV Test current：<15mA
  • Range: 4 ranges, automatic, manual, nominal

Compare

AT526G

  • Parameters: ACR, DCV
  • Accuracy: R：0.5% V：0.01%
  • Range: R：0.001mΩ~33.000kΩ V：0.00001V~400.000VDC
  • Signal Source: AC 1kHz，Test current：<150mA
  • Range: Automatic & Manual, 7 ranges

Compare

AT527F

  • Parameters: ACR, DCV
  • Accuracy: Resistance accuracy: 0.5%，Voltage accuracy: 0.01%
  • Range: Test range：0.0001mΩ~3kΩ & 0.00001~200.000V
  • Signal Source: 1kHz, stable frequency: 20ppm
  • Range: 3mΩ~3kΩ with 7 range test.Auto, manual, Nominal.

Compare

AT572B

  • Parameters: ACR, DCV
  • Accuracy: Accuracy of resistance 0.5%，voltage accuracy 0.01%
  • Range: Test range 0.0001mΩ~3kΩ & 0.00001~800.000V
  • Signal Source: 1kHz, Frequency stability: 20ppm
  • Range: 3mΩ~3kΩ with 7 ranges. Automatic,Manual and Nominal

Compare

AT527K

  • Parameters: ACR, DCV
  • Accuracy: Accuracy of resistance: 0.5%，voltage: 0.01%
  • Range: Test range: 0.0001mΩ~3kΩ & 0.00001~1500.00V
  • Signal Source: 1kHz, frequency stability: 20ppm
  • Range: 3mΩ~3kΩ with 7 ranges. automatic, manual and nominal.

Compare

AT529

  • Parameters: ACR, DCV
  • Accuracy: Accuracy of Resistance 0.5%, voltage 0.01%
  • Range: Test range 0.0001mΩ~330000Ω & 0.000001V~400.000VDC
  • Signal Source: 1kHz, frequency stability: 20ppm
  • Range: 7 ranges automatic, manual, and nominal. Range nominal: The instrument will automatically select the range based on the nominal value.

Compare

AT529A

  • Parameters: ACR, DCV
  • Accuracy: Accuracy of Resistance 0.5%, voltage 0.01%
  • Range: Test range 0.0001mΩ~330000Ω & 0.000001V~200.000VDC
  • Signal Source: 1kHz, frequency stability: 20ppm
  • Range: 7 ranges automatic, manual, and nominal. Range nominal: The instrument will automatically select the range based on the nominal value.

Compare

AT529B

  • Parameters: ACR, DCV
  • Accuracy: Accuracy of Resistance 0.5%, voltage 0.01%
  • Range: Test range 0.0001mΩ~330000Ω & 0.000001V~800.000VDC
  • Signal Source: 1kHz, frequency stability: 20ppm
  • Range: 7 ranges automatic, manual, and nominal. Range nominal: The instrument will automatically select the range based on the nominal value.

Compare

AT529H

  • Parameters: ACR, DCV
  • Accuracy: Accuracy of Resistance 0.5%, voltage 0.01%
  • Range: Test range 0.0001mΩ~330000Ω & 0.000001V~1000.000VDC
  • Signal Source: 1kHz, frequency stability: 20ppm
  • Range: 7 ranges automatic, manual, and nominal. Range nominal: The instrument will automatically select the range based on the nominal value.

Compare

AT527S

  • Parameters: ACR, DCV
  • Accuracy: Accuracy of resistance: 0.5%，voltage: 0.01%
  • Range: Test range: 0.0001mΩ~3kΩ & 0.00001~2000.00V
  • Signal Source: 1kHz, frequency stability: 20ppm
  • Range: 3mΩ~3kΩ with 7 ranges. automatic, manual and nominal.

Compare

AT2527

  • Parameters: ACR, DCV
  • Accuracy: Accuracy of Resistance 0.5%, voltage 0.01%
  • Range: Test range 0.0001mΩ~3.3000kΩ & 0.00001V~400.000VDC
  • Signal Source: 1kHz, frequency stability: 20ppm
  • Range: 7 ranges,3mΩ~3kΩ. auto , manual,, nominal.

Compare

AT2527L

  • Parameters: ACR, DCV
  • Accuracy: Accuracy of Resistance 0.5%, voltage 0.01%
  • Range: Test range 0.0001mΩ~3.3000kΩ & 0.00001V~60.0000VDC
  • Signal Source: 1kHz, frequency stability: 20ppm
  • Range: 7 ranges,3mΩ~3kΩ. auto , manual,, nominal.
Privacy | Term of Use | Help
©2005-2024 Changzhou Applent Instruments Ltd. 苏ICP备13026254号