| Test Functions | Cs-Rs,Cs-D,Cp-Rp,Cp-D,Lp-Rp,Lp-Q,Ls-Rs,Ls-Q,R-X,Z-θrad,Z-θdeg |
| Accuracy | 0.05% |
| Measurement Frequency | 50/60/100/120/200/400/500/1k/2k/4k/5k/10k/20k/40k/100kHz |
| Measurement Range | AUTO/HOLD/NOMINAL 9 Ranges |
| Measurement Speed | 40/10/3 times/s |
| Display Range | L: 0.00001μH-9999.99H
C: 0.00001pF – 9999.99μF
R,X,Z: 0.00001Ω - 99.9999MΩ
D, 0.00001 – 9.99999
Q: 0.00001 – 99999.9
Δ%: -999999% - 999999%
θ(deg): -179.999° -179.999°
θ(rad):-3.14159 – 3.14159
DCR: 0.00001Ω ~ 99.9999MΩ |
| Source Resistance | 30Ω, 50Ω and 100Ω |
| Monitor Parameter | Z, D, Q, θr, θd, R, X, G, B, Y, Vac, Iac, Δ, Δ% |
| Display Reader | 6 digits: 999999 |
| Equivalent Circuit | Serial and Parallel |
| Signal Level | 10.00mV~2.00V AC
100.0μA~20.00mA AC |
| Average | 1~256 |
| Trigger Mode | INT/HOLD/MAN/BUS |
| Trigger Delay | 0.01ms~60s |
| Comparator | OK: 10-BINS NG:1-BIN
AUX: 1-BIN |
| List Test | 10 Steps (Frequency/Voltage/Current) |
| Comparator Mode | SEQ/ABS/PER |
| Adjustment | OPEN/SHORT Zeroing (ALL,SPOT) |
| Files | built-in 10 files and USB Disk 10 files |
| Data Logger | 9999 Log Files (.csv) |
| Beep Feature | OFF/PASS/FAIL |
| Interface | RS232/RS485/USB/HANDLER/GPIB(OPTION)
(For Rev.E+ Only) |
| Protocol | SCPI/Modbus*
(*Rev.E) |
| Other Functions | AUTO LCZ |
| Power Supply | AC 100V-240V, 50Hz-60Hz
20W MAX |
| Dimension & Weight | 264(W)x107(H)x350(L)
3kg, net |